Dell Inspiron 23 2350 Service Manual - Page 62
Replacing the System Board, Procedure, Post-requisites
View all Dell Inspiron 23 2350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the desired changes again after you replace the system board. Procedure 1 Align the screw holes on the system board with the screw holes on the computer base. 2 Replace the screws that secure the system board to the computer base. 3 Connect the USB-board cable to the system board. 4 Adhere the USB-board cable to the USB board. 5 Connect the fan cable to the system board. Post-requisites 1 Replace the processor. 2 Replace the heat sink. 3 Replace the coin-cell battery. 4 Replace the wireless card. 5 Replace the mSATA card. 6 Follow the procedure from step 5 to step 8 in "Replacing the Hard Drive". 7 Replace the memory module(s). 8 Replace the computer base. 9 Replace the base cover. 62