Dell Inspiron 24 3459 Service Manual - Page 41
Replacing the heat sink, Procedure, Post-requisites
View all Dell Inspiron 24 3459 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Replacing the heat sink WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Incorrect alignment of the heat sink can damage the system board and processor. NOTE: The original thermal grease can be reused if the original system board and heat sink are reinstalled together. If either the system board or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. Procedure 1 Align the screw hole on the heat sink with the screw hole on the displayassembly base. 2 Align the captive screws on the heat sink with the screw holes on the system board. 3 In sequential order (as indicated on the heat sink), tighten the captive screws that secure the heat sink to the system board. 4 Replace the screw that secures the heat sink to the display-assembly base. Post-requisites 1 Replace the back cover. 2 Replace the stand assembly. 41