Dell Inspiron 24 3459 Service Manual - Page 77
Removing the rubber feet, Prerequisites, Procedure
View all Dell Inspiron 24 3459 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Removing the rubber feet WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Prerequisites 1 Remove the stand assembly. 2 Remove the back cover. 3 Remove the optical drive. 4 Remove the hard drive. 5 Remove the memory module. 6 Remove the wireless card. 7 Remove the heat sink. 8 Remove the fan. 9 Remove the coin-cell battery. 10 Remove the microphone. 11 Remove the camera. 12 Remove the system board. 13 Remove the VESA-mount bracket. 14 Remove the speaker cover. 15 Remove the speakers. 16 Remove the control-buttons board. 17 Remove the display assembly. Procedure 1 Remove the screws that secure the rubber feet to the display bezel. 77