Dell Inspiron 24 3459 Service Manual - Page 53

Replacing the camera, Procedure, Post-requisites

Get Dell Inspiron 24 3459 PDF manuals and user guides View all Dell Inspiron 24 3459 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Replacing the camera WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Connect the microphone and camera cable to the camera module. 2 Push the tabs on the camera module into the tab on the camera-module slot. 3 Press the camera module down into the slot on the display bezel until it snaps into place. 4 Follow the procedure from step 1 to step 2 in "Replacing the microphone". 5 Route the microphone and camera cable through the routing guides on the display-assembly base. 6 Connect the microphone and camera cable to the system board. Post-requisites 1 Replace the back cover. 2 Replace the stand assembly. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the microphone and camera cable to the camera module.
2
Push the tabs on the camera module into the tab on the camera-module
slot.
3
Press the camera module down into the slot on the display bezel until it
snaps into place.
4
Follow the procedure from step 1 to step 2 in ”
Replacing the
microphone
".
5
Route the microphone and camera cable through the routing guides on
the display-assembly base.
6
Connect the microphone and camera cable to the system board.
Post-requisites
1
Replace the
back cover
.
2
Replace the
stand assembly
.
53