Dell Inspiron 24 3459 Service Manual - Page 79
Replacing the rubber feet, Procedure, Post-requisites
View all Dell Inspiron 24 3459 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Replacing the rubber feet WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the rubber feet with the screw holes on the display bezel. 2 Replace the screws that secure the rubber feet to the display bezel. Post-requisites 1 Replace the display assembly. 2 Replace the control-buttons board. 3 Replace the speakers. 4 Replace the speaker cover. 5 Replace the VESA-mount bracket. 6 Replace the system board. 7 Replace the camera. 8 Replace the microphone. 9 Replace the coin-cell battery. 10 Replace the fan. 11 Replace the heat sink. 12 Replace the wireless card. 13 Replace the memory module. 14 Replace the hard drive. 15 Replace the optical drive. 16 Replace the back cover. 17 Replace the stand assembly. 79