Dell Inspiron 24 5475 Inspiron 24 5000 Service Manual - Page 62
Replacing the side I/O-board, Procedure, the instructions
View all Dell Inspiron 24 5475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Identifier GUID-2EFE7E92-337F-4710-A2AB-08FF9D39DEFF Status Released Replacing the side I/O-board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Identifier GUID-B7327466-8B47-4D0D-B1D9-4FA52AD5EB1D Status Released Procedure After conducting the following replacement procedure, and if the following cables were disconnected and removed in the removal process reconnect and route through the respective routing guides the following cables: • Antenna cables from the wireless-card. • Speaker cable (SPEAKER) from the system board. • Camera cable (WEBCAM) from the system board. 1 Replace the media-card reader board and the side I/O-board aligning the screw holes with the screw holes on the side I/O-bracket. 2 Replace the four screws (M3x5) securing the side I/O-board and the media-card reader board to the side I/O-bracket. 3 Replace the side I/O-bracket aligning the guiding pins and screw holes to the respective slots and screw holes on the middle frame. 4 Replace the two screws (M3x5) securing the side I/O-bracket to the middle frame. 5 Route the side I/O-board and media-card reader cables (MB-SUSBC and SDRDC1) through the routing guides on middle frame. 62