Dell Inspiron 24 5475 Inspiron 24 5000 Service Manual - Page 93
Removing the I/O board, Prerequisites, Procedure
View all Dell Inspiron 24 5475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Identifier GUID-DC61C8F1-86D0-49DE-B8D8-229750E714D6 Status Released Removing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Identifier GUID-03ED21C7-4AD2-4963-A530-1EBCCE89AEBC Status Released Prerequisites 1 Remove the back cover. 2 Remove the stand. 3 Remove the inner frame. 4 Remove the I/O board bracket. Identifier GUID-E9B53490-9AEB-483C-B91B-1C16A0DB0411 Status Released Procedure 1 Open the latch and disconnect the display-panel cable (EDPCN1) from the I/O board. 2 Disconnect the rear I/O-board power cable (RPWRC1) from the I/O board. 3 Using the pull tab, disconnect the display cable (SB-DISPC) from the I/O board. 4 Using the pull tab, disconnect the USB Type-C cable (SB-TYPEC1) from the I/O board. 5 Press down the latch on the power cable connector and pull the connector to disconnect the power cable (SB-DCPWR) from the I/O board. 93