Dell Inspiron 3670 Service Manual - Page 47

Replacing the 2.5-inch hard drive, Procedure

Get Dell Inspiron 3670 PDF manuals and user guides View all Dell Inspiron 3670 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

29 Replacing the 2.5-inch hard drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Topics: • Procedure • Post-requisites Procedure NOTE: Depending on the configuration ordered there may be up to two 2.5-inch hard drives installed in your computer. The following procedure lists the steps to remove the 2.5-inch hard drive(s) in either or both locations. 1 Align and place the slots on the hard drive with the posts on the chassis, then hold the hard drive in place. NOTE: Ensure that the hard drive is seated correctly with the posts on the chassis before replacing the screws. 2 Replace the two screws (M3x3.5) that secure the hard drive to the chassis. 3 Connect the hard-drive data cable and power cable to the hard drive. Replacing the 2.5-inch hard drive 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Replacing the 2.5-inch hard drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
After working inside
your computer
. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
Topics:
•
Procedure
•
Post-requisites
Procedure
NOTE:
Depending on the
configuration
ordered there may be up to two 2.5-inch hard drives installed in your computer. The
following procedure lists the steps to remove the 2.5-inch hard drive(s) in either or both locations.
1
Align and place the slots on the hard drive with the posts on the chassis, then hold the hard drive in place.
NOTE:
Ensure that the hard drive is seated correctly with the posts on the chassis before replacing the screws.
2
Replace the two screws (M3x3.5) that secure the hard drive to the chassis.
3
Connect the hard-drive data cable and power cable to the hard drive.
29
Replacing the 2.5-inch hard drive
47