Dell Inspiron Small Desktop 3647 Inspiron 3647 Owners Manual - Page 26

Removing the Drive Cage, Prerequisites, Procedure

Page 26 highlights

Removing the Drive Cage WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1 Remove the computer cover. See "Removing the Computer Cover" on page 12. 2 Remove the fan shroud. See "Removing the Fan Shroud" on page 14. 3 Remove the front bezel. See "Removing the Front Bezel" on page 23. Place the computer on its side with the computer cover facing up. Procedure 1 Remove the screws that secure the drive cage to the chassis. 1 1 screw (3) 26 | Removing the Drive Cage

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

26
|
Removing the Drive Cage
Removing the Drive Cage
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the computer cover. See "Removing the Computer Cover" on page 12.
2
Remove the fan shroud. See "Removing the Fan Shroud" on page 14.
3
Remove the front bezel. See "Removing the Front Bezel" on page 23. Place the
computer on its side with the computer cover facing up.
Procedure
1
Remove the screws that secure the drive cage to the chassis.
1
screw (3)
1