Dell Latitude 7400 2-in-1 Service Manual - Page 43
Fan, Removing the fan
View all Dell Latitude 7400 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Next steps 1. Connect the battery cable 2. Install the base cover. 3. Install the SD memory card. 4. Follow the procedure in after working inside your computer. Fan Removing the fan Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the SD memory card. 3. Remove the base cover. 4. Disconnect the battery cable. NOTE: For the Latitude 7400 2-in-1 model shipped with a WWAN card, there is an L-shaped bracket (P-sensor bracket) that covers the four WWAN LTE antenna cable connections to the system board. The screw that secures the bracket to the system also helps secure the fan to the system. Technicians must first remove the bracket before removing the fan and then reinstall the bracket after the fan is reinstalled. Steps 1. Peel off the Mylar sheet from the system board. Removing and installing components 43