Dell Latitude 7400 2-in-1 Service Manual - Page 74
Dell Latitude 7400 2-in-1 Manual
View all Dell Latitude 7400 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
8. Remove the single (M2x2) screw [1] securing the power fingerprint bracket to system board. 9. Remove the power fingerprint bracket [2] and disconnect the cable from the system board [3]. 10. Disconnect the LTE P-sensor and isolator antenna cables [4] from the system board. 11. Disconnect the LTE MAIN and AUX antennae cables [5] from the system board. Insert a plastic scribe into the slit at the bottom-left corner of the connector and then carefully pry up the cable connector from the system board. 74 Removing and installing components
8.
Remove the single (M2x2) screw [1] securing the power fingerprint bracket to system board.
9.
Remove the power fingerprint bracket [2] and disconnect the cable from the system board [3].
10.
Disconnect the LTE P-sensor and isolator antenna cables [4] from the system board.
11.
Disconnect the LTE MAIN and AUX antennae cables [5] from the system board.
Insert a plastic scribe into the slit at the bottom-left corner of the connector and then carefully pry up the cable connector
from the system board.
74
Removing and installing components