Dell Latitude 7480 Owners Manual - Page 25

Installing LED board, Smart card module, Removing smart card cage

Get Dell Latitude 7480 PDF manuals and user guides View all Dell Latitude 7480 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Installing LED board 1 Insert the LED board into the slot on the computer. 2 Tighten the M2.0 x 3.0screw to secure the LED board. 3 Connect the LED cable to the LED board. 4 Install the : a battery b base cover 5 Follow the procedure in After working inside your computer. Smart card module Removing smart card cage 1 Follow the procedure in Before working inside your computer. 2 Remove the: a base cover b battery c PCIe SSD card 3 To disconnect the smart card cable: a Disconnect the smart card cable [1]. NOTE: Ensure to gently push the connector, to avoid damage to the smart card head. b Lift the smart card cable that is affixed to the touchpad module [2]. NOTE: Ensure to pull gently to release it with adhesive tape. Disassembly and reassembly 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
Installing LED board
1
Insert the LED board into the slot on the computer.
2
Tighten the M2.0 x 3.0screw to secure the LED board.
3
Connect the LED cable to the LED board.
4
Install the :
a
battery
b
base cover
5
Follow the procedure in
After working inside your computer
.
Smart card module
Removing smart card cage
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
base cover
b
battery
c
PCIe SSD card
3
To disconnect the smart card cable:
a
Disconnect the smart card cable [1].
NOTE:
Ensure to gently push the connector, to avoid damage to the smart card head.
b
Lift the smart card cable that is
affixed
to the touchpad module [2].
NOTE:
Ensure to pull gently to release it with adhesive tape.
Disassembly and reassembly
25