Dell Latitude 7480 Owners Manual - Page 28
Installing touchpad buttons board, Power connector port, Removing power connector port
View all Dell Latitude 7480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing touchpad buttons board 1 Insert the touchpad buttons board into the slot to align the tabs with the grooves on the computer. 2 Tighten the M2.0 x 3.0screws to secure the touchpad buttons board to the computer. 3 Connect the touchpad buttons board cable to the connector on the touchpad board. 4 Affix the smart card cable and connect it to the connector on the computer 5 Install the: a speaker b battery c base cover 6 Follow the procedure in After working inside your computer. Power connector port Removing power connector port 1 Follow the procedure in Before working inside your computer. 2 Remove the : a base cover b battery 3 To remove the power connector port: a Disconnect the power connector port cable from the system board [1]. 28 Disassembly and reassembly