Dell Latitude 7480 Owners Manual - Page 29

Installing power connector port, Display Assembly

Get Dell Latitude 7480 PDF manuals and user guides View all Dell Latitude 7480 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

NOTE: Ensure to remove the adhesive tape that covers the connector. NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage b Remove the M2.0x3.0 screw (1) to release the metal bracket on the power connector port [2]. c Lift the metal bracket from the computer [3]. d the power connector port from the computer [4]. Installing power connector port 1 Install the power connector port into the slot on the computer. 2 Place the metal bracket on the power connector port. 3 Tighten the M2.0x3.0 screw to secure the power connector port to the computer. 4 Connect the power connector port cable to the connector on the system board. 5 Install the : a battery b base cover 6 Follow the procedure in After working inside your computer. Display Assembly Disassembly and reassembly 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
NOTE:
Ensure to remove the adhesive tape that covers the connector.
NOTE:
Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in
breakage
b
Remove the M2.0x3.0 screw (1) to release the metal bracket on the power connector port [2].
c
Lift the metal bracket from the computer [3].
d
the power connector port from the computer [4].
Installing power connector port
1
Install the power connector port into the slot on the computer.
2
Place the metal bracket on the power connector port.
3
Tighten the M2.0x3.0 screw to secure the power connector port to the computer.
4
Connect the power connector port cable to the connector on the system board.
5
Install the :
a
battery
b
base cover
6
Follow the procedure in
After working inside your computer
.
Display Assembly
Disassembly and reassembly
29