Dell Latitude CPt S Service Manual - Page 43

PC Card slot. - latitude cpt screen

Get Dell Latitude CPt S PDF manuals and user guides View all Dell Latitude CPt S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

4-mm screw with captive washers white marks on the system board bottom case assembly system board assembly 10-mm screw (system with modem) or 4-mm screw (system without modem) M2.5x4 M2.5x10 10. Remove the modem (if present). 11. Lift the system board assembly out of the bottom case assembly. 1. Install the replacement system board. 2. Replace the modem (if present). 3. Replace the system board mounting screws. 4. Replace the microprocessor, the palmrest assembly, the display assembly and the keyboard assembly. NOTE: Be sure to transfer the memory module(s) to the replacement system board assembly. 5. Replace the modular bay devices and any PC Cards or plastic blanks in the PC Card slot. 6. Insert the diskette (or CD-ROM) that accompanied the replacement system board assembly into the appropriate drive, and turn on the computer. Follow the instructions on the display screen. NOTE: After replacing the system board assembly, be sure to enter the system's service tag number into the BIOS of the replacement system board assembly. support.dell.com Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
support.dell.com
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
35
±²³´µ¶·Â¹··ÊÅ%¾¶¼·Ä»ÁµÎ·)%%¶¼!ÈÅ
10. Remove the modem (if present).
11.
Lift the system board assembly out of the bottom case assembly.
ŲÃÉÇ̹º»¶ÄͲ¶-"½Ä²Â¶±´Çµ¾
1.
Install the replacement system board.
2.
Replace the modem (if present).
3.
Replace the system board mounting screws.
4.
Replace the microprocessor, the palmrest assembly, the display assembly
and the keyboard assembly.
NOTE: Be sure to transfer the memory module(s) to the replacement system
board assembly.
5.
Replace the modular bay devices and any PC Cards or plastic blanks in the
PC Card slot.
6.
Insert the diskette (or CD-ROM) that accompanied the replacement system
board assembly into the appropriate drive, and turn on the computer.
Follow the instructions on the display screen.
NOTE: After replacing the system board assembly, be sure to enter the sys-
tem
’
s service tag number into the BIOS of the replacement system board
assembly.
4-mm screw with
captive washers
system board assembly
bottom case assembly
M2.5x4
M2.5x10
10-mm screw (system
with modem)
or 4-mm screw (system
without modem)
white marks on
the system board