Dell Latitude D620 Service Manual - Page 14

Removing the Display Panel

Page 14 highlights

1 screw covers/display bumpers (6) 4 top cover 2 M2.5 x 5-mm screws (6) 3 display bezel Removing the Display Panel CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide. CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface. 1. Follow the instructions in Before Working Inside Your Computer. 2. Remove the display assembly (see Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Remove the four M2 x 3-mm screws from each side of the display panel. 5. Lift the display panel out of the top cover. 1 display panel 4 notches for cable routing 2 top cover 3 M2 x 3-mm screws (4)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43

Removing the Display Panel
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the display assembly (see
Display Assembly
).
3.
Remove the display bezel (see
Removing the Display Bezel
).
4.
Remove the four M2 x 3-mm screws from each side of the display panel.
5.
Lift the display panel out of the top cover.
1
screw covers/display bumpers (6)
2
M2.5 x 5-mm screws (6)
3
display bezel
4
top cover
CAUTION:
Before performing the following procedures, follow the safety instructions in the
Product Information Guide
.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1
display panel
2
top cover
3
M2 x 3-mm screws (4)
4
notches for cable routing