Dell Latitude D620 Service Manual - Page 5
Computer Orientation, Screw Identification
UPC - 837654219218
View all Dell Latitude D620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network device. 3. Disconnect any telephone, network, and USB cables from the computer. 4. Disconnect your computer and all attached devices from their electrical outlets. 5. Turn over the computer. NOTICE: To avoid damaging the system board, you must remove the main battery before you service the computer. 6. Remove the battery: a. Slide the two battery-bay latch releases on the bottom of the computer toward the sides of the computer until they are engaged. b. Grasp the battery by the battery tab and slide the battery horizontally toward the front of the computer. c. Lift to remove the battery from the bay. 1 battery 2 battery-bay latch release 3 battery tab 7. Press the power button to ground the system board. 8. Remove any installed ExpressCards from the ExpressCard slot. Computer Orientation 1 front 2 left 3 back 4 right Screw Identification When you are removing and replacing components, print this section as a tool to lay out and keep track of the screws. The printout provides the number of screws and their sizes.