Dell Latitude E6420 Administration Guide - Page 29
TCP/IP Settings - part number
View all Dell Latitude E6420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
NOTE: The TTL option is only available when Dynamic DNS Update is enabled. This setting allows configuring the TTL time in seconds. This number should be greater than zero. If set to zero firmware uses its internal default value which is 15 min or 1/3 of lease time for DHCP. 7. Previous Menu Under the Intel ME Network Name Settings select Previous Menu and press . The Intel ME Network Name Settings menu changes to the Intel Network Setup page. TCP/IP Settings Under the Network Setup menu select TCP/IP Settings and press . The Intel Network Setup page appears. The Intel Network Setup menu changes to the TCP/IP Settings page. NOTE: The Intel MEBx has menus for Wireless IPv6, but no menu for wireless IPv4. When the Intel MEBx starts it will check for the wireless interface to make the decision to display the wireless IPv6 menu or not. Wired LAN IPv4 Configuration Under the TCP/IP Settings select Wired LAN IPv4 Configuration and press . The Wired LAN IPv4 Configuration page appears.