Dell Latitude E7250 Dell Owners Manual - Page 11
Installing the Base Cover, Removing the SSD Card, battery, After Working Inside Your computer
View all Dell Latitude E7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing the Base Cover 1. Place the base cover to align with the screw holes correctly on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Install battery. 4. Follow the procedures in After Working Inside Your computer. Removing the SSD Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. base cover 3. Perform the following steps as shown in the illustration: a. Remove the screws that secure the SSD card to the computer [1]. b. Lift and remove the SSD card from the computer [2]. 11
Installing the Base Cover
1.
Place the base cover to align with the screw holes correctly on the computer.
2.
Tighten the screws to secure the base cover to the computer.
3.
Install
battery
.
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the SSD Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
base cover
3.
Perform the following steps as shown in the illustration:
a.
Remove the screws that secure the SSD card to the computer [1].
b.
Lift and remove the SSD card from the computer [2].
11