Dell Latitude E7250 Dell Owners Manual - Page 37
Wake on LAN/WLAN, Wireless Radio Control - power adapter
View all Dell Latitude E7250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Option Hyper-Thread Control Description Default Setting: Enable Intel TurboBoost Allows you to enable or disable the HyperThreading in the processor. Default Setting: Enabled Table 8. Power Management Option AC Behavior Auto On Time USB Wake Support Wireless Radio Control Wake on LAN/WLAN Block Sleep Peak Shift Description Allows the computer to power-on automatically, when AC adapter is plugged. The option is disabled. • Wake on AC Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled (Default Setting) • Every Day • Weekdays • Select Days Allows you to enable the USB devices to wake the computer from standby mode. The option is disabled • Enable USB Wake Support Allows you to control the WLAN and WWAN radio. The options are: • Control WLAN radio • Control WWAN radio Default Setting: both the options are disabled. This option allows the computer to power up from the off state when triggered by a special LAN signal. Wake up from the Standby state is unaffected by this setting and must be enabled in the operating system. This feature only works when the computer is connected to AC power supply. • Disabled - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. (Default Setting) • LAN Only - Allows the system to be powered on by special LAN signals. • WLAN Only • LAN or WLAN Allows you to block the computer from entering into the sleep state. This option is disabled by default. • Block Sleep (S3) Peak Shift can be used to minimize AC consumption during peak powers times of day. Set the start and end time to run in Peak Shift mode. 37