Dell N3200-ON Networking N-Series Switches RESTful API User Guide version 6.8. - Page 77
Table 4, Interface READ Request Details Continued, Parameter Type, Description
View all Dell N3200-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Table 4-44. Interface READ Request Details (Continued) Parameter Type Description - linkState The link state of the interface, which is either enabled or disabled. An interface is considered active if the link is up, and the interface is in a forwarding state. - mtuSize Indicates Maximum Transmission Unit (MTU) of the interface. The actual frame size is calculated by adding Ethernet header size in MTU. - participation Participation mode is shown as 'included', 'excluded', or 'auto' for the VLAN specified by the vlan argument. If the vlan argument is omitted, then it is an array of VLANs that this interface participates in. - physicalAddress The burned-in physical address of the interface. The format is six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. - pvId If the given interface is assigned as the port VLAN ID. - speed The physical link data rate of the interface. - tagging Identified as 'tagged' or 'untagged' for the VLAN specified by the vlan argument. If vlan is not specified, it is an array of VLANs that are tagged for this interface. - type Interface type, such as physical, VLAN, LAG, and so on. - lastChange The time of last link state change in seconds. - inOctets The total number of octets received on the interface including framing characters. - inUcastPkts The number of packets, delivered by this sub-layer to a higher sub-layer. - inDiscards The number of inbound packets which were chosen to be discarded. - inErrors The current value of the errors counter. - inUnknownProtos The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. Rest API Reference 77