Dell OptiPlex 980 Technical Guidebook - Page 20

Power NOTE: The OptiPlex XE utilizes wide-ranging power supplies. These power supplies do not require users to switch or reconfigure the PSU when alternating between 100-240VAC electrical currents/sockets. The XE also uses a more efficient Active Power Factor Correction (APFC) power supply. Dell recommends only Uninterruptible Power Supplies (UPS) based on Sine Wave output for APFC PSUs, not an approximation of a Sine Wave, Square Wave, or quasi-Square Wave. If you have questions, please contact the manufacture to confirm the output type. DT (EPA) Power Supply Wattage AC input Voltage Range AC input current (low ac range/high AC range) AC input Frequency 300W High Efficiency 100 to 240Vac 6.0A / 3.0A 50HZ / 60HZ AC holdup time (80% load) 16MSEC Average Efficiency (Energy Star 5.0 Compliant) 88% DC parameters +3.3v output 6.0A +5.0v output 16A +12.0v output 18A +5.0v auxiliary output 4.0A -12.0v output 0.5A // 24.8Vdc/3.0A Max total power 300W Max combined +3.3v / +5.0v power 90watt Max combined 12.0v power (note: only if more than one 12v rail) NA-only one 12V rail BTUs/h (based on PSU max wattage) 1163 3.3v CMOS battery (type and estimated battery life) Power Supply Fan 92*25mm Compliance: 1watt requirement Yes Blue Angel Compliant No Climate Savers / 80Plus Compliant Yes FEMP (CECP) Standby Power Compliant Yes EnergyStar5.0 Yes (select configurations) EPEAT Gold EuP TCO 05 WEEE Japan Energy Law CEC Japan Green PC FEMP South Korea Eco-Label EU RoHS China RoHS Yes (select configurations) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes SFF (EPA 280W High Efficiency 100 to 240Vac 5.0A / 2.5A 50HZ / 60HZ 16MSEC 88% 6.0A 16A 17A 4.0A 0.5A // 24.8Vdc/3.0A 280W 90watt NA-only one 12V rail 1085 80*15mm Yes No Yes Yes Yes (select configurations) Yes (select configurations) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes OptiPlex XE Technical Guidebook Page 20