Dell OptiPlex 980 Technical Guidebook - Page 23

Communications - Secondary Integrated LAN BROADCOM® BCM57780 NETLINK® 10/100/1000 GIGABIT ETHERNET (GBE) DT SFF Connector Type RJ45 Data Rates supported Controller Details Controller bus architecture (example PCIe 1.0a x1) 10/100/1000 Mbps Half/Full duplex PCIe 1.1 x1 Integrated memory Data transfer mode (example Bus-Master DMA) Power consumption (full operation per data rate connection speed) Power consumption (standby operation) 16KBytes RX, 8KBytes TX DMA 804mW(+5% for 1.2V, nominal +10% for 3.3VMax.) 73mW(10Base-T,WOL enabled) IEEE standards compliance (example 802.1P) Hardware Certifications (example FCC, B, GS mark...) 802.3, 802.3u,80.3ab, 802.3z, 802.1p RoHS Boot ROM Support No Network Transfer Mode (example Full Duplex, Half Duplex) Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps 10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps Environmental Operating temperature Operating humidity Operating System Driver Support Manageability (examples WOL, PXE) Management Capabilities Alerting Full Duplex/Half Duplex 10BASE-T (full-duplex) 20 Mbps Max* 100BASE-TX (half-duplex) 100 Mbps Max* 100BASE-TX (full-duplex) 200 MbpsMax* 1000BASE-T (full-duplex) 2000 Mbps Max* * Depends on the system environment. 0° C to 70° C (32° F to 158° F) 5% ~ 85% (non-condensing) Windows® 7, Windows® XP, Windows Vista® Ultimate, Windows Vista® Business 32 bit/64 bit, Windows Vista Home Basic, Linux WOL, PXE2.1, ACPI None OptiPlex XE Technical Guidebook Page 23