Dell OptiPlex 980 Technical Guidebook - Page 22

Communications - Primary Integrated LAN NOTE: The OptiPlex XE supports 2 on-board LOMs (LAN On Motherboard) standard INTEGRATED BROADCOM® BCM5761 NETXTREME® 10/100/1000 GIGABIT ETHERNET (GBE) DT SFF External Connector Type Data Rates supported Controller Details RJ45 10/100/1000 Mbps Controller bus architecture PCIe 1.1 x1 Integrated memory Data transfer mode (example Bus-Master DMA) Power consumption (full operation per data rate connection speed) Power consumption (standby operation) IEEE standards compliance (example 802.1P) Hardware Certifications (example FCC, B, GS mark...) Boot ROM Support Network Transfer Mode (example Full Duplex, Half Duplex) Network Transfer Rate (example 10BASE-T (half-duplex) 10 Mbps 10BASE-T (full-duplex) 20 Mbps 100BASE-TX (half-duplex) 100 Mbps 100BASE-TX (full-duplex) 200 Mbps 1000BASE-T (full-duplex) 2000 Mbps Environmental Operating temperature Operating humidity Operating System Driver Support Manageability (examples WOL, PXE) Management Capabilities Alerting 48-KB rx and 8-KB tx buffer DMA 1023mW (+5% for 1.2V and 2.5V, nominal +10% for 3.3VMax.) 203mW (D3cold with WOL enabled.) 802.3 RoHS SPI flash 10 Mb (full/half-duplex) 100 Mb (full/half-duplex) 1000 Mb (full-duplex) 0° C to 70° C (32° F to 158° F) 20% to 80% (non-condensing) Windows® XP, Windows Vista® Ultimate, Windows Vista® Business 32 bit/64 bit, Windows Vista Home Basic WOL, PXE 2.1 Broadcom® TruManage™ OptiPlex XE Technical Guidebook Page 22