Dell OptiPlex SX270N Setup and Quick Reference Guide - Page 16
Attaching the Stand, Connecting the AC Adapter, three mounting slots on the back of the computer.
View all Dell OptiPlex SX270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
www.dell.com | support.dell.com NOTE: If you are installing the computer under a desktop or tabletop, first attach all cables, and then attach the stand to the mounting plate (see "Attaching the Stand to the Mounting Plate" on page 19). 3 Attaching the Stand 1 Raise the captive screw and slide the chassis stand slat into one of three mounting slots on the back of the computer. 2 When the stand is in place, tighten the screw. NOTICE: If your computer is oriented under a desktop or tabletop and is in a high-vibration environment, use the optional wall-mount bracket instead of the computer stand. NOTE: The power adapter LED will light when the adapter is properly plugged into a wall outlet and into the computer. 4 Connecting the AC Adapter 1 Connect the power adapter to the connector on the back of the computer. 2 Connect the power cable to the power adapter. NOTICE: The following steps apply to Japan only. 14 Setup and Quick Re ference Guide