Dell OptiPlex SX270N Setup and Quick Reference Guide - Page 19
Attaching the Cable Cover, Hold the bottom piece of the cable cover and align the four tabs - no lights on back cover
View all Dell OptiPlex SX270N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
6 Attaching the Cable Cover NOTICE: If you are installing the computer under a desktop or tabletop, do not attach the cable cover until the computer is firmly attached to the mounting plate (see Step 7, "Attaching the Stand to the Mounting Plate" on page 19). NOTICE: If you use the stand on your computer, attach the stand before attaching the cable cover. security cable slot Do not place the computer facedown on the bezel NOTICE: When attaching the cable cover, do not place the computer facedown so that the surface comes in contact with a hard surface. Doing so may press the power button and may scratch the face of the computer. 1 Attach all of the cables to the back of the computer. 2 Hold the bottom piece of the cable cover and align the four tabs with the four slots on the computer's back panel. 3 Insert the tabs into the slots and slide the piece toward the diagnostic lights (see the illustration) until it is securely positioned. 4 Grasp the top piece of the cable cover and align the two tabs with the two slots in the computer's back panel. Setup and Quick Reference Guide 17