Dell PowerConnect 5224 User Manual - Page 15

CLI Commands The following table summarizes the equivalent CLI commands for items in the Switch/Security/Authentication Settings page. Command authentication login {radius | local | tacacs} [tacacs | radius | local] [local | tacacs | radius] radius-server host host_ip_address radius-server port port_number radius-server key key_string radius-server retransmit number_of_retries radius-server timeout number_of_seconds show radius-server tacacs-server host host_ip_address tacacs-server port port_number tacacs-server key key_string show tacacs-server Usage Defines the login authentication method and precedence. Specifies the RADIUS server IP address. Sets the RADIUS server UDP port number. Sets the RADIUS encryption key (up to 20 characters). Sets the number of times the switch attempts to authenticate logon access through the RADIUS server. (The range is 1-30.) Sets the number of seconds the switch waits for a reply before resending a request. (The range is 1-65535.) Displays the current configuration of the RADIUS server parameters. Specifies the TACACS+ server IP address. Sets the TACACS+ server TCP port number. Sets the TACACS+ encryption key (up to 20 characters). Displays the current configuration of the TACACS+ server parameters. Example Console(config)#authentication login local radius tacacs Console(config)#radius-server host 192.168.1.25 Console(config)#radius-server port 181 Console(config)#radius-server key green Console(config)#radius-server retransmit 5 NOTE: The default password for the enable command is super. The manager must change the password. Addendum to the 3 248 and 52 24 User 's Guides 15