Dell PowerConnect 5224 User Manual - Page 36

www.dell.com | support.dell.com NOTICE: The default setting is null, which allows all IP groups SNMP access to the switch. If one IP address is configured, the IP filtering is enabled and only addresses in the IP group will have SNMP access. To add an IP address, type the new IP address in the IP Address box, type the appropriate subnet mask in the Subnet Mask box, and click Add IP Filtering Entry. To delete an IP address, click the entry in the IP Filter List, and then click Remove IP Filtering Entry. The following figure is representative of PowerConnect 3248 and 5224. CLI Commands The following table summarizes the equivalent CLI commands for items in the SNMP/IP Filtering page. Command snmp ip filter ip_address subnet_mask Usage Sets IP addresses of clients allowed to management access to the switch using SNMP. The no form command removes an IP address. 36 Addendum to the 32 48 and 5 224 User 's Guides