Dell PowerConnect 5224 User Manual - Page 16

www.dell.com | support.dell.com NOTE: If you enable HTTPS, you must indicate this in the URL. For example: https://device [:port_number] Console(config)#radius-server timeout 10 Console(config)#tacacs-server host 192.168.1.19 Console(config)#tacacs-server port 49 Console(config)#tacacs-server key tiger Console(config)# Console#show tacacs-server Remote TACACS server configuration: Server IP address: 192.168.1.19 Communication key with radius server: tiger Server port number: 49 Console# Hypertext Transfer Protocol, Secure Use the Switch/Security/HTTPS page to enable the Secure Hypertext Transfer Protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure access (for example, an encrypted connection) to the switch's Web interface. Both the HTTP and HTTPS service can be enabled independently on the switch. However, you cannot configure the HTTP and HTTPS servers to use the same TCP port. If you change the HTTPS port number, clients attempting to connect to the HTTPS server must specify the port number in the URL, in this format: https://device:port_number. The following Web browsers and operating systems currently support HTTPS: Web Browser Microsoft® Internet Explorer 5.0 or later Netscape Navigator 4.76 or later Operating System Windows® 98, Windows NT® (with service pack 6a), Windows 2000 Windows 98, Windows NT (with service pack 6a), Windows 2000, Solaris 2.6 16 Addendum to the 32 48 and 5 224 User 's Guides