Dell PowerConnect 5324 Release Notes - Page 13

Interface CoS/QoS Settings PowerConnect 5324 Release Notes The following Screens has been updated under the QOS section Remove the following field descriptions. • Queue - The queue number. • Queue Mode - Indicates whether the queue is Strict Priority or WRR. This is defined in the Queue Settings screen. → SP can be configured on all queues 1 - 4. This is the default configuration. → WRR can be configured on all queues 1 - 4. → Two queues on WRR and two queues on SP. The options are as follows: SP mode can be configured on queues 1 - 2 and WRR on queues 3 - 4 → WRR mode can be configured on queues 1 - 2 and SP on queues 3 - 4 → WRR mode can be configured on queues 1 - 3, with SP on queues 4 • Weight (0-255) - Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. • % of WRR Bandwidth - The percentage translation of the weight defined in the Weight (0-255) field. After the instructions for Assigning QoS/CoS settings for an interface, add the following instructions: Displaying QoS/CoS settings: 1. Open the Qos/Cos page. 2. Click Show All. The Interface Table is displayed. System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 9