Dell PowerConnect 5324 Release Notes - Page 21

channel-group PowerConnect 5324 Release Notes Update the command as follows: Field User Guidelines Current Guide There are no user guidelines for this command. Change to: For redundancy reasons, the LACP port channel can accept up to 16 ports but only 8 will be active at the same time. wrr-queue bandwidth Update the command as follows: Field User Guidelines Current Guide ♦ All 4 queues are participating excluding the queues that are assigned as expedite queues. The weights of these queues are ignored in the ratio calculation. ♦ All 4 queues participate in the WRR exclude the expedite queues, in which case the corresponded weight is ignored (not used in the ratio calculation). The expedite queue is a priority queue, and it is serviced until empty before the other queues are serviced. Change to: ♦ All 4 queues are participating excluding the queues that are assigned as Strict Priority (SP) queues. The weights of these queues are ignored in the ratio calculation. ♦ All 4 queues participate in the WRR exclude the Strict Priority (SP) queues, in which case the corresponded weight is ignored (not used in the ratio calculation). The expedite queue is a priority queue, and it is serviced until empty before the other queues are serviced. rmon collection history Update the command as follows: Field Syntax Parameter Current Guide owner ownername-Records the RMON statistics group owner name. If unspecified, the name is an empty string. Change to: owner ownername-Records the RMON statistics group owner name. If unspecified, the name is an empty string (Range: 0-20 characters). switchport trunk allowed vlan Update the command as follows: Field Syntax Parameter Current Guide switchport trunk allowed vlan {add vlan-list | remove vlan-list } • add vlan-list-List of VLAN IDs to add. Separate non consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. Change to: switchport trunk allowed vlan {add vlan-list/all | remove vlan-list/all } ♦ add vlan-list-List of VLAN IDs to add. Separate non consecutive VLAN IDs with a comma and no spaces. A hyphen designates a range of IDs. The option all System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 17