Dell PowerConnect 5324 Release Notes - Page 7

Security - images

Page 7 highlights

PowerConnect 5324 Release Notes Security SSH Title Serial connection is lost after 4 concurrent SSH sessions Deleting SSH generated crypto key Description An attempt to open a forth SSH session will cause the serial connection to the device to become inactive. Workaround: Do not open more than three concurrent SSH sessions. Once a key is generated (RSA or DSA), a key cannot be removed. Workaround: Erase the flash image and reload. ID 24773 25047 802.1x Title 802.1x authentication does not work when EAP packets are transmitted with a VLAN tag = 0 Description When 802.1x packets are transmitted with VLAN tag = 0, port cannot authenticate. Workaround: Do not use VLAN 0 for network configurations. Switch default VLAN is 1. ID 23215 Incorrect information displayed in "Authenticated Users" Web-based management page Incorrect information displayed in "Authenticated Users" Web-based management page with no relevancy to 802.1x status (enabled or disabled) Workaround: Use CLI for "Authenticated Users" status. 25857 System Firmware Version 2.0.0.39 Subject to Change Without Notice Page 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

PowerConnect 5324 Release Notes
System Firmware Version 2.0.0.39
Subject to Change Without Notice
Page 3
Security
SSH
Title
Description
ID
Serial connection is lost after 4
concurrent SSH sessions
An attempt to open a forth SSH session will cause the serial
connection to the device to become inactive.
Workaround:
Do not open more than three concurrent SSH
sessions.
24773
Deleting SSH generated crypto key
Once a key is generated (RSA or DSA), a key cannot be
removed.
Workaround:
Erase the flash image and reload.
25047
802.1x
Title
Description
ID
802.1x authentication does not work
when EAP packets are transmitted
with a VLAN tag = 0
When 802.1x packets are transmitted with VLAN tag = 0, port
cannot authenticate.
Workaround:
Do not use VLAN 0 for network configurations.
Switch default VLAN is 1.
23215
Incorrect information displayed in
"Authenticated Users" Web-based
management page
Incorrect information displayed in "Authenticated Users" Web-based
management page with no relevancy to 802.1x status (enabled or
disabled)
Workaround:
Use CLI for “Authenticated Users” status.
25857