Dell PowerConnect 5324 User's Guide - Page 224
consoleconfig-if# ex, consoleconfig# interface rangeg21-24
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
www.dell.com | support.dell.com Table 7-54. LAG Configuration CLI Commands CLI Command Description flowcontrol {auto | on | off | rx | Configures the Flow Control on a given tx} interface. show interfaces configuration Displays the configuration for all configured [ethernet interface| port-channel interfaces. port-channel-number] show interfaces status [ethernet interface |port-channel portchannel-number] Displays the status for all configured interfaces. show interfaces description Displays the description for all configured [ethernet interface |port-channel interfaces. port-channel-number] show interfaces port-channel [port-channel-number] Displays Port-channel information (which ports are members of that port-channel, and whether they are currently active or not). The following is an example of the CLI commands: console(config-if)# channel-group 1 mode on console(config-if)# exit console(config)# interface range e g21-24 console(config-if)# channel-group 1 mode on console(config-if)# ex console(config)# interface ethernet g5 console(config-if)# channel-group 2 mode on console(config-if)# exit console(config)# exit console# show interfaces port-channel Channel Ports --------- --------- ch1 Inactive: g(21-24) ch2 Active: g5 224 Configuring Device Information