Dell PowerConnect 5324 User's Guide - Page 50

www.dell.com | support.dell.com Verifying the IP and Default Gateway Addresses Ensure that the IP address and the default gateway are properly assigned by executing the following command and examining its output: Command console# show ip interface vlan 1 Output Gateway IP Address 192.168.1.1 Activity status Active IP address 192.168.1.123 /24 Interface VLAN 1 Type Static NOTE: It is recommended that the most recent revision of the user documentation is downloaded from the Dell support website at support.dell.com. User Name To manage the device remotely, for example through SSH, Telnet, or the Web interface, a user name must be configured. To gain complete administrative control over the device the highest priviledge (15) must be specified. NOTE: Only the administrator (super-user) with the highest priviledge level (15) is allowed to manage the device through the Web browser interface. For more information about the privilege level, see the "CLI Reference Guide". The configured user name is entered as a login name for remote management sessions. To configure user name and privilege level, enter the command at the system prompt as shown in the configuration example: console> enable console# configure console(config)# username admin password abc level 15 50 Starting and Configuring the Device