Dell PowerConnect 6224P Getting Started Guide - Page 161

To add a management station: Please enter the SNMP community string to be used {Dell_Network_Manager}: Dell_Network_Manager SNMP SNMPv1/2c SNMPv3 ID SNMPv3 Please enter the IP address of the Management System (A.B.C.D) or wildcard (0.0.0.0) to manage from any Management Station {0.0.0.0}: 192.168.1.10 手順 2： Now we need to configure your initial privilege (Level 15) user account.This account is used to login to the CLI and Web interface.You may set up other accounts and change privilege levels later.For more information on setting up user accounts and changing privilege levels, see the User's Guide. To set up a user account: Please enter the user name {admin}:admin Please enter the user password:******** Please reenter the user password:******** メモ：1 回目と 2 Easy Setup Wizard 3： Next, an IP address is set up.The IP address is defined on the default VLAN (VLAN #1), of which all ports are members.This is the IP address you use to access the CLI, Web interface, or SNMP interface for the switch. To set up an IP address: Please enter the IP address of the device (A.B.C.D): 192.168.1.100 Please enter the IP subnet mask (A.B.C.D or /nn): 255.255.255.0 はじめに 159