Dell PowerConnect 8024F User's Guide - Page 614

3. Click the Delete box if deleting the DNS Server Address for this pool. 4. Click the Delete box if deleting the Domain Name for this pool. 5. Click the Delete Pool box if deleting the entire pool. 6. Click Apply Changes. The pool or its parameter setting is deleted, and the device is updated. Configuring DHCPv6 Pool Parameters Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • DHCPv6 Commands The following table summarizes the equivalent CLI commands for this feature. Table 10-7. DHCPv6 Pool Configuration Commands CLI Command dns-server domain-name ipv6 dhcp pool Description Sets the ipv6 DNS server address which is provided to a DHCPv6 client by the DHCPv6 server. Sets the DNS domain name which is provided to a DHCPv6 client by the DHCPv6 server. Enters IPv6 DHCP Pool Configuration mode. Prefix Delegation Configuration Use the Prefix Delegation Configuration page to configure a delegated prefix for a pool. At least one pool must be created using DHCPv6 Pool Configuration before a delegated prefix can be configured. To display the page, click IPv6 →DHCPv6 →Prefix Delegation Configuration in the tree view. 614 Configuring IPv6