Dell PowerConnect B-RX BigIron RX Series Configuration Guide v02.7.03 - Page 899

Displaying BGP4 information 26 TABLE 123 This field... TotalRcv DupliRcv RcvWnd SendQue RcvQue CngstWnd BGP4 neighbor information (Continued) Displays... The number of sequence numbers received from the neighbor. The number of duplicate sequence numbers received from the neighbor. The size of the receive window. The number of sequence numbers in the send queue. The number of sequence numbers in the receive queue. The number of times the window has changed. Displaying route information for a neighbor You can display routes based on the following criteria: • A summary of the routes for a specific neighbor. • The routes received from the neighbor that the device selected as the best routes to their destinations. • The routes received from the neighbor that are the best BGP4 routes to their destinations, but were nonetheless not installed in the IP route table because the device received better routes from other sources (such as OSPF, RIP, or static IP routes). • The routes that are unreachable because the device does not have a valid RIP, OSPF, or static route to the next hop. • Routes for a specific network advertised by the device to the neighbor. • The Routing Information Base (RIB) for a specific network advertised to the neighbor. You can display the RIB regardless of whether the device has already sent it to the neighbor. Displaying summary route information To display summary route information, enter a command such as the following at any level of the CLI. BigIron RX(config-bgp)# show ip bgp neighbor 10.1.0.2 routes-summary 1 IP Address: 10.1.0.2 Routes Accepted/Installed:1, Filtered/Kept:11, Filtered:11 Routes Selected as BEST Routes:1 BEST Routes not Installed in IP Forwarding Table:0 Unreachable Routes (no IGP Route for NEXTHOP):0 History Routes:0 NLRIs Received in Update Message:24, Withdraws:0 (0), Replacements:1 NLRIs Discarded due to Maximum Prefix Limit:0, AS Loop:0 Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0 Duplicated Originator_ID:0, Cluster_ID:0 Routes Advertised:0, To be Sent:0, To be Withdrawn:0 NLRIs Sent in Update Message:0, Withdraws:0, Replacements:0 Peer Out of Memory Count for: Receiving Update Messages:0, Accepting Routes(NLRI):0 Attributes:0, Outbound Routes(RIB-out):0 BigIron RX Series Configuration Guide 827 53-1001986-01