Dell PowerConnect Brocade 6510 Hardware Reference - Page 19

Chapter Brocade 6510 Installation and Configuration 2 In this chapter •Items included with the Brocade 6510 5 •Installation and safety considerations 5 •Standalone installation for a Brocade 6510 7 •Cabinet installation for a Brocade 6510 8 •Brocade 6510 configuration 8 •Fabric OS Native and Access Gateway modes 13 Items included with the Brocade 6510 The following items are included with the standard shipment of a fully-configured Brocade 6510. When you open the Brocade 6510 packaging, verify that these items are included in the package and that no damage has occurred during shipping: • The Brocade 6510 switch, containing two combined power and fan assemblies (incorporating either nonport side exhaust or port side exhaust airflow as ordered - airflow labels on the nonport side exhaust assemblies) • 16 Gbps or 8 Gbps SFP+ modules for the Fibre Channel ports (speed and quantity as ordered) • One accessory kit, containing the following items: • Serial cable with an RJ45 connector • Two 6 ft. Power Cords • Rubber feet, required for setting up the switch as a standalone unit • Brocade Family Doc CD • Brocade 6510 EZSwitch Setup poster • EZSwitch Setup CD Installation and safety considerations You can install the Brocade 6510 switch in the following ways: 1. As a standalone unit on a flat surface. 2. In an EIA cabinet using a slim rail rack mount kit. The rack mount kit can be ordered from your switch retailer. 3. In an EIA cabinet using an optional mid-mount rack kit for switches. The optional mid-mount rack kit for switches can be ordered from your switch retailer. Brocade 6510 Hardware Reference Manual 5 53-1002174-06