Dell PowerConnect M6348 Command Line Interface Guide - Page 1056

www.dell.com | support.dell.com snmp-server user Use the snmp-server user command in Global Configuration mode to configure a new SNMP Version 3 user. To delete a user, use the no form of this command. Syntax snmp-server user username groupname [remote engineid-string] [ { auth-md5 password | authsha password | auth-md5-key md5-key | auth-sha-key sha-key } [priv-des password | priv-deskey des-key] ] no snmp-server user username • username - Specifies the name of the user on the host that connects to the agent. (Range: 1- 30 characters.) • groupname - Specifies the name of the group to which the user belongs. (Range: 1-30 characters.) • engineid-string - Specifies the engine ID of the remote SNMP entity to which the user belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal character string is two hexadecimal digits. The remote engine id designates the remote management station, and should be defined to enable the device to receive acknowledgements to "informs." (Range: 5-32 characters.) • auth-md5 - The HMAC-MD5-96 authentication level. • auth-sha - The HMAC-SHA-96 authentication level. • password - A password. (Range: 1 to 32 characters.) • auth-md5-key - The HMAC-MD5-96 authentication level. Enter a pregenerated MD5 key. • auth-sha-key - The HMAC-SHA-96 authentication level. Enter a pregenerated SHA key. • md5-key - Character string-length 32 hex characters. • sha-key - Character string-length 48 characters. • priv-des - The CBC-DES Symmetric Encryption privacy level. Enter a password. • priv-des-key - The CBC-DES Symmetric Encryption privacy level. The user should enter a pregenerated MD5 or SHA key depending on the authentication level selected. • des-key - The pregenerated DES encryption key. Length is determined by authentication method selected-32 hex characters if MD5 Authentication is selected, 48 hex characters if SHA Authentication is selected. Default Configuration No user entry exists. 1056