Dell PowerEdge M420 InfiniScale IV 16+16 Port 40Gb/s InfiniBand Switch for Del - Page 4

M3601Q 16+16 Port 40Gb/s InfiniBand Switch User Manual 4 About this Manual This manual describes the installation and basic use of the Mellanox M3601Q 16+16 Port 40Gb/s InfiniBand Switch for Dell PowerEdge M1000e-series Blade Enclosures. Intended Audience This manual is intended for users and system administrators responsible for installing and setting up the switch platforms listed above. The manual assumes familiarity with the InfiniBand® Architecture Specification. Related Documentation The documentation set accompanying the Mellanox M3601Q includes the following: Table 1 - Reference Documents InfiniBand Architecture Specification Volume 1 Release 1.2.1 and Volume 2 release 1.2.1 InfiniBand architecture specification descriptions Mellanox Firmware Tools (MFT) User's Manual Document # 2329 The MFT (Mellanox Firmware Tools) package is a set of firmware tools. The manual supplied with this package provides an overview of the firmware its installation and replacement. The MFT can be downloaded with its documentation at: http://www.mellanox.com > Downloads > Firmware Tools. Online Resources • Mellanox Technologies Web pages: http://www.mellanox.com • Dell Support Web pages: http://support.dell.com Conventions Throughout this manual, the name M3601Q and the terms switch, I/O module, and IOM are used to describe the 16+16 port 40Gb/s InfiniBand switch for the Dell M1000e, unless explicitly indicated otherwise. Mellanox Technologies Rev 1.1