Dell PowerEdge M710 Hardware Owner's Manual - Page 258
Installing the System Board, SD vFlash card PowerEdge M910, M710, and M610 only. See SD
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
11 Remove the video riser card or daughter card. See "Video Controller (PowerEdge M905, M805, M605, and M600 Only)" on page 251. 12 Remove the memory modules and memory module blanks. See "Removing Memory Modules" on page 195. 13 Remove the processor(s). See "Removing a Processor" on page 226. 14 Remove the storage controller board. See "Removing the Storage Controller Board" on page 259. 15 Remove the NIC hardware activation key. See "System Board Connectors" on page 316 for the location of the key. Installing the System Board 1 Transfer the following components to the new system board: • NIC hardware activation key. See "System Board Connectors" on page 316 for the location of the key. • Internal USB key. • Storage controller board. See "Installing the Storage Controller Board" on page 260. • SD vFlash card (PowerEdge M910, M710, and M610 only). See "SD vFlash Card (PowerEdge M910, M710, M710HD, M610, and M610x Only)" on page 206. • SD card. See "SD Card" on page 204. • Memory modules and memory module blanks. See "Installing Memory Modules" on page 194. • Processor(s) and heat sink(s), or processor filler blank. See "Installing a Processor" on page 239. • HT bridge cards (PowerEdge M905 only). See "HT Bridge Card (PowerEdge M905 Only)" on page 242. • FlexMem bridges (PowerEdge M910 only). See "FlexMem Bridge (PowerEdge M910 Only)" on page 241. 258 Installing Blade Components