Dell PowerEdge M710 Hardware Owner's Manual - Page 55
Table 1-13., Example of I/O Module Port Assignments - M610x Blade in slot 2, Blade 2, I/O Module
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
• Mezzanine card 3, connection 1 connects to I/O module C1, port n+8. Mezzanine card 3, connection 2 connects to I/O module C2 port n+8. • Mezzanine card 4, connection 1 connects to I/O module B1, port n+8. Mezzanine card 4, connection 2 connects to I/O module B2 port n+8. For example, in a full-height blade mezzanine card 3, connection 1 connects to I/O module C1, port 13 and Mezzanine card 3, connection 2 connects to I/O module C2 port 13. Table 1-14 shows the port number assignments for the eight possible full height blade locations. NOTE: Even though M610x is a full blade system, only two mezzanine card slots (MEZZ1_Fab_C1 and MEZZ2_FAB_B1) in the expansion bay are available for use. The other two slots on the system board (MEZZ1_FAB_C and MEZZ2_FAB_B) are occupied by the mezzanine interface card which provides connectivity between the PCIe expansion-card riser and the system board. For an M610x blade in bay n: • Mezzanine card B (in the expansion bay) connects to I/O module B1, port n+8 and I/O module B2, port n+8. • Mezzanine card C (in the expansion bay) connects to I/O module C1, port n+8 and I/O module C2, port n+8. Table 1-13. Example of I/O Module Port Assignments - M610x Blade in slot 2 Blade 2 I/O Module A1 B1 C1 C2 B2 A2 Mezzanine Card C Port 10 Port 10 Mezzanine Card B Port 10 Port 10 About Your System 55