Dell PowerEdge M710 Hardware Owner's Manual - Page 85
Brocade M5424 FC8 I/O Module, The Brocade M5424 I/O module includes eight external autosensing Fibre
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Table 1-21. Fibre Channel Pass-Through Indicators (continued) Indicator Type Pattern Description Fibre Channel Green off, amber Power off Port LEDs off with Qlogic mezzanine card Installed Green off, amber on Online, 1 Gb or 2 Gb link Green on, amber Online, 4 Gb link off Green off, amber I/O activity, 1 Gb or 2 Gb flashing Green flashing, I/O activity, 4 Gb amber off Green flashing and amber flashing at same time Loss of synchronization Green flashing Firmware error and amber flashing at different intervals Off/amber flashing (twice per second) Connection has lost synchronization. Brocade M5424 FC8 I/O Module The Brocade M5424 I/O module includes eight external autosensing Fibre Channel ports (four ports are enabled in the standard configuration and four additional ports may be enabled as an optional upgrade), 16 internal ports, and one serial port with an RJ-45 connector. The external Fibre Channel ports operate at 8 Gb/sec, 4 Gb/sec, or 2 Gb/sec. NOTE: CMC firmware version 1.3 is required to support FC8 mezzanine cards and I/O modules. NOTE: This Fibre Channel switch module includes Short Wave Small Form Factor Pluggable (SFP) optical transceivers. To ensure proper functionality, use only SFPs provided with this module. About Your System 85