Dell PowerEdge M710HD Fabric OS Administrator’s Guide - Page 460

18 Displaying bottleneck detection configuration details 1. Connect to the switch to which the target port belongs and log in as admin. 2. Enter the bottleneckmon --exclude command to exclude the port from bottleneck detection. To later include the port, enter the bottleneckmon --include command. Example switch:admin> bottleneckmon --exclude 4 Displaying bottleneck detection configuration details Using the following procedure, you can display details of the bottleneck detection configuration, including the following: • Whether the feature is enabled • Switch-wide alerting parameters • Port-specific alerting parameters • Excluded ports 1. Connect to the switch and log in as admin. 2. Enter the bottleneckmon --status command to display the details of bottleneck detection configuration for the switch. Example switch:admin> bottleneckmon --status Bottleneck detection - Enabled Switch-wide alerting parameters: Alerts - Yes Latency threshold for alert - 0.100 Congestion threshold for alert - 0.800 Averaging time for alert - 300 seconds Quiet time for alert - 300 seconds Excluded ports Port ==== 12 13 14 Changing bottleneck alert parameters When you enable bottleneck detection, you can configure alert parameters that apply to every port on the switch. After you enable bottleneck detection, you can change the alert parameters on all eligible ports on the switch or on individual ports. You can also change the alert parameters on ports that have been excluded from bottleneck detection. 420 Fabric OS Administrator's Guide 53-1001763-02