Home » Dell Manuals » Servers » Dell PowerEdge MX840c » Manual Viewer

Dell PowerEdge MX840c iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACA - Page 123

with disk addition are R0-R1, R0-R5/R6,R1-R0/R5/R6, R5-R0/R6, R6-R0/R5. Possible raid

View all Dell PowerEdge MX840c manuals

Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

• r60-storage 60-Spanned Striping with Extra Parity • -new_rl-Specifies the new possible raid level for the virtual disk • r0-RAID0 • r1-RAID1 • r5-RAID5 • r6-RAID6 NOTE: This is a mandatory option must provide with RLM operation. Possible raid migrations with disk addition are R0-R1, R0-R5/R6,R1-R0/R5/R6, R5-R0/R6, R6-R0/R5. Possible raid migrations without disk addition are R1-R0, R5-R0, R6-R0/R5. • -wp{wt|wb|wbf}-Sets the write policy to Write Through, Write Back, or Write Back Force • -rp {nra|ra|ara}-Sets the read policy to No Read Ahead, Read Ahead, Adaptive Read Ahead • -ss-Specifies the stripe size to use. • -pdkey:-Specifies the physical disk drive to use in the virtual disk. • -dcp-Sets the Disk Cache Policy in the Virtual Disk. • enabled-Allows the virtual disk to use the cache. • disabled-Does not allow the virtual disk to use the cache. • default-Uses the default cache policy. For SAS drives, use the disabled option and for SATA drives, use the enabled option by default. • -name -Specifies the name of the virtual disk. • -size -Specifies the size of each virtual disk. • b-Specifies the size in bytes • k-Specifies the size in kilobytes • m-Specifies the size in megabytes • g-Specifies the size in gigabytes • t-Specifies the size in terabytes • -sc-Number of spans in a virtual disk (required for multi-span RAID level). NOTE: • For PERC9, if the value of controller.SupportRAID10UnevenSpans is supported, you can enter only 0 for this option while creating RAID level 10. The created RAID10 virtual disk displays the spandepth as 1 (default). • For other controllers: • The default value for multi-span RAID levels is 2 and for basic RAID level is 1. • For hybrid RAID levels such as RAID10, RAID50, and RAID60, this option is mandatory. • The value for-sc option can be 0 only for RAID10. • -T10PIEnable-Creates a virtual disk with protection information. • -key -Specifies the key id. • -passwd -Specifies the passphrase. • -newpasswd -Specifies the new passphrase. • -assign {yes | no}-Assigns or unassigns the disk as a hotspare. • -type { ghs | dhs}-Assigns a global or dedicated hotspare. • -vdkey:-Assigns the dedicated hotspare to the specified virtual disk. This option is required for dedicated hotspare. • -state -start value starts a patrol read operation. stop value stops a running patrol read operation. NOTE: To start the operation, the Controller.PatrolReadMode must be in Manual mode. • -speed-Specifies the initialization of the Virtual disk. • fast-Performs fast initialization. • full-Performs slow initialization. • blink: or unblink: - can be physical disk drives, virtual disks, or PCIeSSD. • -Specifies the PCIeSSD FQDD. • -Specifies the PCIeSSD controller or enclosure FQDD. RACADM Subcommand Details 123

Section	Page
iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACADM CLI Guide	3
Introduction	34
New in this release	34
Supported RACADM Interfaces	34
RACADM Syntax Usage	34
SSH, Telnet, or Remote RACADM	35
Remote RACADM	35
Accessing Indexed-Based Device Groups and Objects	36
RACADM Command Options	36
Using autocomplete feature	37
Lifecycle Controller Log	38
Unsupported RACADM Subcommands	38
Proxy parameters	38
Other Documents You May Need	39
Accessing documents from Dell support site	39
Contacting Dell	40
RACADM Subcommand Details	41
Guidelines to Quote Strings Containing Special Characters When Using RACADM Commands	42
help and help subcommand	43
arp	43
autoupdatescheduler	44
bioscert	46
cd	48
cd..	48
clearasrscreen	49
clearpending	49
closessn	50
clrsel	50
config	50
coredump	52
coredumpdelete	52
diagnostics	53
driverpack	54
eventfilters	55
exposeisminstallertohost	57
fcstatistics	57
frontpanelerror	57
fwupdate	58
get	60
getconfig	63
gethostnetworkinterfaces	66
getled	66
getniccfg	67
getraclog	68
getractime	69
getremoteservicesstatus	70
getsel	70
getsensorinfo	71
getssninfo	75
getsvctag	75
getsysinfo	76
gettracelog	77
getversion	78
GroupManager	80
hwinventory	80
ifconfig	85
inlettemphistory	86
jobqueue	87
krbkeytabupload	89
lclog	89
license	93
netstat	95
nicstatistics	95
ping	97
ping6	97
RACADM Proxy	97
racdump	99
racreset	100
racresetcfg	100
recover	101
remoteimage	102
rollback	103
sensorsettings	103
serveraction	104
set	105
setled	109
setniccfg	110
sshpkauth	110
sslcertdownload	111
sslcertupload	112
sslcertview	113
sslcertdelete	115
sslcsrgen	116
sslkeyupload	117
sslresetcfg	117
storage	117
SupportAssist	136
swinventory	140
switchconnection	141
systemconfig	142
systemerase	144
systemperfstatistics	146
techsupreport	147
testemail	148
testtrap	149
testalert	149
traceroute	150
traceroute6	150
update	151
usercertupload	154
usercertview	155
vflashsd	155
vflashpartition	156
vmdisconnect	157
iDRAC Property Database Group and Object Descriptions	158
Displayable Characters	159
idRacInfo	159
idRacProductInfo (Read Only)	159
idRacDescriptionInfo (Read Only)	159
idRacVersionInfo (Read Only)	160
idRacBuildInfo (Read Only)	160
idRacName (Read Only)	160
cfgStaticLanNetworking	160
cfgNicStaticEnable (Read or Write)	160
cfgNicStaticIPv4Enable (Read or Write)	161
cfgNicStaticIpAddress (Read or Write)	161
cfgNicStaticUseDhcp (Read or Write)	161
cfgNicStaticNetmask (Read or Write)	161
cfgNicStaticGateway (Read or Write)	162
cfgDNSStaticServersFromDHCP (Read or Write)	162
cfgDNSStaticServer1 (Read or Write)	162
cfgDNSStaticServer2 (Read or Write)	162
cfgDNSStaticDomainName(Read or Write)	162
cfgDNSStaticDomainNameFromDHCP (Read or Write)	163
cfgRemoteHosts	163
cfgRhostsFwUpdateTftpEnable (Read or Write)	163
cfgRhostsFwUpdateIpAddr (Read or Write)	163
cfgRhostsFwUpdatePath (Read or Write)	163
cfgRhostsSmtpServerIpAddr (Read or Write)	164
cfgRhostsSyslogEnable (Read or Write)	164
cfgRhostsSyslogPort (Read or Write)	164
cfgRhostsSyslogServer1 (Read or Write)	164
cfgRhostsSyslogServer2 (Read or Write)	164
cfgRhostsSyslogServer3 (Read or Write)	165
cfgUserAdmin	165
cfgUserAdminIndex (Read Only)	165
cfgUserAdminIpmiLanPrivilege (Read or Write)	165
cfgUserAdminIpmiSerialPrivilege (Read or Write)	165
cfgUserAdminPrivilege (Read or Write)	166
cfgUserAdminUserName (Read or Write)	167
cfgUserAdminPassword (Write Only)	167
cfgUserAdminEnable (Read or Write)	167
cfgUserAdminSolEnable (Read or Write)	168
cfgEmailAlert	168
cfgEmailAlertAddress (Read or Write)	168
cfgEmailAlertEnable (Read or Write)	168
cfgEmailAlertIndex (Read Only)	168
cfgEmailAlertCustomMsg (Read or Write)	169
cfgEmailAlertEmailName (Read Only)	169
cfgSessionManagement	169
cfgSsnMgtRacadmTimeout (Read or Write)	169
cfgSsnMgtConsRedirMaxSessions (Read or Write)	170
cfgSsnMgtWebserverTimeout (Read or Write)	170
cfgSsnMgtSshIdleTimeout (Read or Write)	170
cfgSsnMgtTelnetIdleTimeout (Read or Write)	170
cfgSerial	171
cfgSerialBaudRate (Read or Write)	171
cfgSerialConsoleEnable (Read or Write)	171
cfgSerialConsoleQuitKey (Read or Write)	171
cfgSerialConsoleIdleTimeout (Read or Write)	172
cfgSerialConsoleNoAuth (Read or Write)	172
cfgSerialConsoleCommand (Read or Write)	172
cfgSerialHistorySize (Read or Write)	172
cfgSerialCom2RedirEnable (Read or Write)	173
cfgSerialSshEnable (Read or Write)	173
cfgSerialTelnetEnable (Read or Write)	173
cfgOobSnmp	173
cfgOobSnmpAgentCommunity (Read or Write)	174
cfgOobSnmpAgentEnable (Read or Write)	174
cfgRacTuning	174
cfgRacTuneConRedirPort (Read or Write)	174
cfgRacTuneRemoteRacadmEnable (Read or Write)	174
cfgRacTuneCtrlEConfigDisable	175
cfgRacTuneHttpPort (Read or Write)	175
cfgRacTuneHttpsPort (Read or Write)	175
cfgRacTuneIpRangeEnable (Read or Write)	175
cfgRacTuneIpRangeAddr (Read or Write)	175
cfgRacTuneIpRangeMask (Read or Write)	176
cfgRacTuneSshPort (Read or Write)	176
cfgRacTuneTelnetPort (Read or Write)	176
cfgRacTuneConRedirEnable (Read or Write)	176
cfgRacTuneConRedirEncryptEnable (Read or Write)	176
cfgRacTuneAsrEnable (Read or Write)	177
cfgRacTuneDaylightOffset (Read Only)	177
cfgRacTuneTimezoneOffset (Read Only)	177
cfgRacTuneLocalServerVideo (Read or Write)	178
cfgRacTuneLocalConfigDisable (Read or Write)	178
cfgRacTuneWebserverEnable (Read or Write)	178
cfgRacTuneVirtualConsoleAuthorizeMultipleSessions (Read or Write)	179
cfgRacTunePluginType (Read or Write)	179
ifcRacManagedNodeOs	179
ifcRacMnOsHostname (Read Only)	179
ifcRacMnOsOsName (Read Only)	179
cfgRacVirtual	180
cfgVirMediaAttached (Read or Write)	180
cfgVirtualBootOnce (Read or Write)	180
cfgVirMediaFloppyEmulation (Read or Write)	180
cfgSDWriteProtect (Read Only)	181
cfgServerInfo	181
cfgServerName (Read Or Write)	181
cfgServerNic3MacAddress (Read Only)	181
cfgServerNic4MacAddress (Read Only)	181
cfgServerDNSIMCName (Read or Write)	182
cfgServerFirstBootDevice (Read or Write)	182
cfgServerBootOnce (Read or Write)	182
cfgActiveDirectory	182
cfgADSSOEnable (Read or Write)	183
cfgADDomainController1 (Read or Write)	183
cfgADDomainController2 (Read or Write)	183
cfgADDomainController3 (Read or Write)	183
cfgADRacName (Read or Write)	183
cfgADRacDomain (Read or Write)	184
cfgADAuthTimeout (Read or Write)	184
cfgADEnable (Read or Write)	184
cfgADType (Read or Write)	184
cfgADGlobalCatalog1 (Read or Write)	184
cfgADGlobalCatalog2 (Read or Write)	185
cfgADGlobalCatalog3 (Read or Write)	185
cfgADCertValidationEnable (Read or Write)	185
cfgADDcSRVLookupEnable (Read or Write)	185
cfgADDcSRVLookupbyUserdomain (Read or Write)	186
cfgADDcSRVLookupDomainName (Read or Write)	186
cfgADGcSRVLookupEnable (Read or Write)	186
cfgADGcRootDomain (Read or Write)	186
cfgLDAP	186
cfgLDAPBaseDN (Read or Write)	187
cfgLDAPBindPassword (Write Only)	187
cfgLDAPCertValidationEnable (Read or Write)	187
cfgLDAPBindDN (Read or Write)	187
cfgLDAPEnable (Read or Write)	187
cfgLDAPGroupAttribute (Read or Write)	188
cfgLDAPGroupAttributeIsDN (Read or Write)	188
cfgLDAPPort (Read or Write)	188
cfgLDAPSearchFilter (Read or Write)	188
cfgLDAPServer (Read or Write)	188
cfgLDAPUserAttribute (Read or Write)	189
cfgLdapRoleGroup	189
cfgLdapRoleGroupDN (Read or Write)	189
cfgLdapRoleGroupPrivilege (Read or Write)	189
cfgStandardSchema	190
cfgSSADRoleGroupDomain (Read or Write)	190
cfgSSADRoleGroupIndex (Read Only)	190
cfgSSADRoleGroupName (Read or Write)	190
cfgSSADRoleGroupPrivilege (Read or Write)	190
cfgThermal	191
cfgThermalEnhancedCoolingMode (Read or Write)	191
cfgIpmiSol	191
cfgIpmiSolEnable (Read or Write)	191
cfgIpmiSolBaudRate (Read or Write)	192
cfgIpmiSolMinPrivilege (Read or Write)	192
cfgIpmiSolAccumulateInterval (Read or Write)	192
cfgIpmiSolSendThreshold (Read or Write)	192
cfgIpmiLan	192
cfgIpmiLanEnable (Read or Write)	193
cfgIpmiLanPrivLimit (Read or Write)	193
cfgIpmiLanAlertEnable (Read or Write)	193
cfgIpmiLanEncryptionKey (Read or Write)	193
cfgIpmiLanPetCommunityName (Read or Write)	193
cfgIpmiPetIpv6	194
cfgIpmiPetIPv6Index (Read Only)	194
cfgIpmiPetIPv6AlertDestIpAddr	194
cfgIpmiPetIPv6AlertEnable (Read or Write)	194
cfgIpmiPef	194
cfgIpmiPefName (Read Only)	194
cfgIpmiPefIndex (Read or Write)	195
cfgIpmiPefAction (Read or Write)	195
cfgIpmiPefEnable (Read or Write)	195
cfgIpmiPet	195
cfgIpmiPetIndex (Read Only)	195
cfgIpmiPetAlertDestIpAddr (Read/Write)	196
cfgIpmiPetAlertEnable (Read or Write)	196
cfgUserDomain	196
cfgUserDomainIndex (Read Only)	196
cfguserdomainname (Read Only)	196
cfgServerPower	196
cfgServerPowerStatus (Read Only)	197
cfgServerPowerAllocation (Read Only)	197
cfgServerActualPowerConsumption (Read Only)	197
cfgServerPowerCapEnable (Read or Write)	197
cfgServerMinPowerCapacity (Read Only)	197
cfgServerMaxPowerCapacity (Read Only)	198
cfgServerPeakPowerConsumption (Read Only)	198
cfgServerPeakPowerConsumptionTimestamp (Read Only)	198
cfgServerPowerConsumptionClear (Write Only)	198
cfgServerPowerCapWatts (Read or Write)	198
cfgServerPowerCapBtuhr (Read or Write)	199
cfgServerPowerCapPercent (Read or Write)	199
cfgServerPowerLastHourAvg (Read Only)	199
cfgServerPowerLastDayAvg (Read Only)	199
cfgServerPowerLastWeekAvg (Read Only)	199
cfgServerPowerLastHourMinPower (Read Only)	200
cfgServerPowerLastHourMinTime (Read Only)	200
cfgServerPowerLastHourMaxPower (Read Only)	200
cfgServerPowerLastHourMaxTime (Read Only)	200
cfgServerPowerLastDayMinPower (Read Only)	201
cfgServerPowerLastDayMinTime (Read Only)	201
cfgServerPowerLastDayMaxPower (Read Only)	201
cfgServerPowerLastDayMaxTime (Read Only)	201
cfgServerPowerLastWeekMinPower (Read Only)	202
cfgServerPowerLastWeekMinTime (Read Only)	202
cfgServerPowerLastWeekMaxPower (Read Only)	202
cfgServerPowerLastWeekMaxTime (Read Only)	203
cfgServerPowerInstHeadroom (Read Only)	203
cfgServerPowerPeakHeadroom (Read Only)	203
cfgServerActualAmperageConsumption (Read Only)	203
cfgServerPeakAmperage (Read Only)	204
cfgServerPeakAmperageTimeStamp (Read Only)	204
cfgServerCumulativePowerConsumption (Read Only)	204
cfgServerCumulativePowerConsumptionTimeStamp (Read Only)	204
cfgServerCumulativePowerClear (Write Only)	205
cfgServerPowerPCIeAllocation (Read or Write)	205
cfgServerPowerSupply	205
cfgServerPowerSupplyCurrentDraw (Read Only)	205
cfgServerPowerSupplyFwVer (Read Only)	206
cfgServerPowerSupplyIndex	206
cfgServerPowerSupplyMaxInputPower (Read Only)	206
cfgServerPowerSupplyMaxOutputPower (Read Only)	206
cfgServerPowerSupplyOnlineStatus (Read Only)	206
cfgServerPowerSupplyType	207
cfgIPv6LanNetworking	207
cfgIPv6Enable (Read or Write)	207
cfgIPv6Address1 (Read or Write)	207
cfgIPv6Gateway (Read or Write)	207
cfgIPv6AutoConfig (Read or Write)	207
cfgIPv6PrefixLength (Read or Write)	208
cfgIPv6LinkLocalAddress (Read Only)	208
cfgIPv6Address2 (Read Only)	208
cfgIPv6Address3 (Read Only)	208
cfgIPv6Address4 (Read Only)	209
cfgIPv6Address5 (Read Only)	209
cfgIPv6Address6 (Read Only)	209
cfgIPv6Address7 (Read Only)	209
cfgIPv6Address8 (Read Only)	209
cfgIPv6Address9 (Read Only)	210
cfgIPv6Address10 (Read Only)	210
cfgIPv6Address11 (Read Only)	210
cfgIPv6Address12 (Read Only)	210
cfgIPv6Address13 (Read Only)	210
cfgIPv6Address14 (Read Only)	211
cfgIPv6Address15 (Read Only)	211
cfgIPv6DNSServer1 (Read or Write)	211
cfgIPv6DNSServersFromDHCP6 (Read or Write)	211
cfgIpv6StaticLanNetworking	211
cfgIPv6StaticEnable (Read or Write)	212
cfgIPv6StaticAddress1 (Read or Write)	212
cfgIPv6StaticGateway (Read or Write)	212
cfgIPv6StaticPrefixLength (Read or Write)	212
cfgIPv6StaticAutoConfig (Read/Write)	212
cfgIPv6StaticDNSServersFromDHCP6 (Read or Write)	213
cfgIPv6StaticDNSServer1 (Read or Write)	213
cfgIPv6StaticDNSServer2 (Read or Write)	213
cfgIPv6DNSServer2 (Read or Write)	213
cfgIPv6URL	214
cfgIPv6URLstring (Read Only)	214
cfgIpmiSerial	214
cfgIpmiSerialBaudRate (Read or Write)	214
cfgIpmiSerialChanPrivLimit (Read or Write)	215
cfgIpmiSerialConnectionMode (Read or Write)	215
cfgIpmiSerialDeleteControl (Read or Write)	215
cfgIpmiSerialEchoControl (Read or Write)	215
cfgIpmiSerialFlowControl (Read or Write)	216
cfgIpmiSerialHandshakeControl (Read or Write)	216
cfgIpmiSerialInputNewLineSequence (Read or Write)	216
cfgIpmiSerialLineEdit (Read or Write)	216
cfgIpmiSerialNewLineSequence (Read or Write)	216
cfgSmartCard	217
cfgSmartCardLogonEnable (Read or Write)	217
cfgSmartCardCRLEnable (Read or Write)	217
cfgNetTuning	217
cfgNetTuningNicAutoneg (Read or Write)	218
cfgNetTuningNic100MB (Read or Write)	218
cfgNetTuningNicFullDuplex (Read or Write)	218
cfgNetTuningNicMtu (Read or Write)	219
cfgSensorRedundancy	219
cfgSensorRedundancyCapabilities (Read Only)	219
cfgSensorRedundancyIndex (Read Only)	219
cfgSensorRedundancyPolicy (Read or Write)	219
cfgSensorRedundancyStatus (Read Only)	220
cfgVFlashSD	220
cfgVFlashSDInitialized (Read Only)	220
cfgVFlashSDEnable (Read or Write)	220
cfgVFlashSDSize (Read Only)	221
cfgVFlashSDLicensed (Read Only)	221
cfgVFlashSDAvailableSize (Read Only)	221
cfgVFlashSDHealth (Read Only)	221
cfgVFlashSDWriteProtect (Read Only)	221
cfgVFlashPartition	222
cfgVFlashPartitionIndex (Read Only)	222
cfgVFlashPartitionSize (Read Only)	222
cfgVFlashPartitionEmulationType (Read or Write)	222
cfgVFlashPartitionFlashOSVolLabel (Read Only)	222
cfgVFlashPartitionFormatType (Read Only)	223
cfgVFlashPartitionAccessType (Read or Write)	223
cfgVFlashPartitionAttachState (Read or Write)	223
cfgLogging	223
cfgLoggingSELOEMEventFilterEnable (Read or Write)	223
cfgRacSecurity	224
cfgRacSecCsrCommonName (Read or Write)	224
cfgRacSecCsrOrganizationName (Read or Write)	224
cfgRacSecCsrOrganizationUnit (Read or Write)	224
cfgRacSecCsrLocalityName (Read or Write)	224
cfgRacSecCsrStateName (Read or Write)	225
cfgRacSecCsrCountryCode (Read/Write)	225
cfgRacSecCsrEmailAddr (Read or Write)	225
Database Objects With Get and Set Commands	226
System.AcquisitionInfo	230
System.AcquisitionInfo.CostCenter (Read or Write)	230
System.AcquisitionInfo.Expensed (Read or Write)	230
System.AcquisitionInfo.InstallDate (Read or Write)	230
System.AcquisitionInfo.PONumber (Read or Write)	231
System.AcquisitionInfo.PurchaseCost (Read or Write)	231
System.AcquisitionInfo.PurchaseDate (Read or Write)	231
System.AcquisitionInfo.Vendor (Read Only)	231
System.AcquisitionInfo.WayBill (Read or Write)	231
System.AcquisitionInfo.WhoSigned (Read or Write)	232
System.Backplane	232
System.Backplane.BackplaneBusMode (Read Only)	232
System.SC-BMC	232
System.SC-BMC.ChassisInfraPower (Read)	232
System.SC-BMC.ChassisPowerCap (Read)	233
System.ChassisControl	233
System.ChassisControl.ChassisManagementMonitoring (Read or Write)	233
System.ChassisInfo	233
System.ChassisInfo.ChassisType(Read or Write)	233
System.ChassisInfo.ConnectionState(Read or Write)	234
System.ChassisInfo.FirmwareVersion (Read or Write)	234
System.ChassisInfo.IPV4Address (Read or Write)	234
System.ChassisInfo.IPV6Address (Read or Write)	234
System.ChassisModel (Read Only)	235
System.ChassisName (Read Only)	235
System.ChassisServiceTag (Read Only)	235
System.CustomAsset	235
System.CustomAsset.Label (Read or Write)	235
System.CustomAsset.Value (Read or Write)	236
System.DepreciationInfo	236
System.DepreciationInfo.Duration (Read or Write)	236
System.DepreciationInfo.DurationUnit (Read or Write)	236
System.DepreciationInfo.Method (Read or Write)	236
System.DepreciationInfo.Percentage (Read or Write)	237
System.ExWarrantyInfo	237
System.ExtWarrantyInfo.Cost (Read or Write)	237
System.ExtWarrantyInfo.EndDate (Read or Write)	237
System.ExtWarrantyInfo.Provider (Read or Write)	237
System.ExtWarrantyInfo.StartDate (Read or Write)	237
System.LCD	238
System.LCD.Configuration (Read or Write)	238
System.LCD.vConsoleIndication (Read or Write)	238
System.LCD.CurrentDisplay (Read Only)	239
System.LCD.LCDUserString (Read or Write)	239
System.LCD.QualifierTemp (Read or Write)	239
System.LCD.QualifierWatt (Read or Write)	239
System.LCD.UserDefinedString (Read or Write)	240
System.LeaseInfo	240
System.LeaseInfo.Buyout (Read or Write)	240
System.LeaseInfo.EndDate (Read or Write)	240
System.LeaseInfo.FairValue (Read or Write)	240
System.LeaseInfo.Lessor (Read or Write)	241
System.LeaseInfo.MultiSched (Read or Write)	241
System.LeaseInfo.RateFactor (Read or Write)	241
System.MaintenanceInfo	241
System.MaintenanceInfo.EndDate (Read or Write)	241
System.MaintenanceInfo.Provider (Read or Write)	242
System.MaintenanceInfo.Restrictions (Read or Write)	242
System.MaintenanceInfo.StartDate (Read or Write)	242
System.OutsourceInfo	242
System.OutsourceInfo.ProbComp (Read or Write)	242
System.OutsourceInfo.ProviderFee (Read or Write)	243
System.OutsourceInfo.ServiceFee (Read or Write)	243
System.OutsourceInfo.SignedFor (Read or Write)	243
System.OutsourceInfo.SLALevel (Read or Write)	243
System.OwnerInfo	243
System.OwnerInfo.InsComp (Read or Write)	244
System.OwnerInfo.OwnerName (Read or Write)	244
System.OwnerInfo.Type (Read or Write)	244
System.ServerTopology	244
System.ServerTopology.Aisle (Read or Write)	244
System.LServerTopology.DataCenter (Read or Write)	245
System.ServerTopology.DeviceSize (Read Only)	245
System.ServerTopology.Rack.Name (Read or Write)	245
System.ServerTopology.Rack.Slot (Read or Write)	245
System.ServerTopology.RoomName (Read or Write)	246
System.Location.ServerTopology.Name (Read Only)	246
System.ServerTopology.Chassis.Slot (Read or Write)	246
System.ServiceContract	246
System.ServiceContract.Renewed (Read or Write)	247
System.ServiceContract.Type (Read or Write)	247
System.ServiceContract.Vendor (Read or Write)	247
System.PCIESlotLFM	247
System. pcieSlotLFM.3rdPartyCard(Read)	247
System. pcieSlotLFM. CardType (Read)	248
System. pcieSlotLFM. CustomLFM (Read or Write)	248
System. pcieSlotLFM .LFMMode(Read or Write)	248
System. pcieSlotLFM.MaxLFM (Read)	248
System.pcieSlotLFM.Slot (Read)	249
System. pcieSlotLFM.SlotState (Read)	249
System. pcieSlotLFM.TargetLFM	249
System.PCIeSlotLFM.PCIeInletTemperature (Read Only)	249
System.Power	250
System.Power.Status (Read Only)	250
System.Power.ServerAllocation (Read Only)	250

Match case Limit results 1 per page

•

r60

—storage 60-Spanned Striping with Extra Parity

•

-new_rl

—Specifies the new possible raid level for the virtual disk

•

—RAID0

•

—RAID1

•

—RAID5

•

—RAID6

NOTE:

This is a mandatory option must provide with RLM operation. Possible raid migrations

with disk addition are R0-R1, R0-R5/R6,R1-R0/R5/R6, R5-R0/R6, R6-R0/R5. Possible raid

migrations without disk addition are R1-R0, R5-R0, R6-R0/R5.

•

-wp{wt|wb|wbf}

—Sets the write policy to Write Through, Write Back, or Write Back Force

•

-rp {nra|ra|ara}

—Sets the read policy to No Read Ahead, Read Ahead, Adaptive Read Ahead

•

-ss

—Specifies the stripe size to use.

•

-pdkey:<PD FQDD list>

—Specifies the physical disk drive to use in the virtual disk.

•

-dcp

—Sets the Disk Cache Policy in the Virtual Disk.

•

enabled

—Allows the virtual disk to use the cache.

•

disabled

—Does not allow the virtual disk to use the cache.

•

default

—Uses the default cache policy. For SAS drives, use the

disabled

option and for SATA drives,

use the

enabled

option by default.

•

-name <VD name>

—Specifies the name of the virtual disk.

•

-size <VD size>

—Specifies the size of each virtual disk.

•

—Specifies the size in bytes

•

—Specifies the size in kilobytes

•

—Specifies the size in megabytes

•

—Specifies the size in gigabytes

•

—Specifies the size in terabytes

•

-sc

—Number of spans in a virtual disk (required for multi-span RAID level).

NOTE:

•

For PERC9, if the value of

controller.SupportRAID10UnevenSpans

supported

, you

can enter only

for this option while creating RAID level 10. The created RAID10 virtual disk

displays the spandepth as

(default).

•

For other controllers:

•

The default value for multi-span RAID levels is 2 and for basic RAID level is 1.

•

For hybrid RAID levels such as RAID10, RAID50, and RAID60, this option is mandatory.

•

The value for

-sc

option can be 0 only for RAID10.

•

-T10PIEnable

—Creates a virtual disk with protection information.

•

-key <Key id>

—Specifies the key id.

•

-passwd <passphrase>

—Specifies the passphrase.

•

-newpasswd <passphrase>

—Specifies the new passphrase.

•

-assign {yes | no}

—Assigns or unassigns the disk as a hotspare.

•

-type { ghs | dhs}

—Assigns a global or dedicated hotspare.

•

-vdkey:<VD FQDD>

—Assigns the dedicated hotspare to the specified virtual disk. This option is required for

dedicated hotspare.

•

-state <start|stop>

—

start

value starts a patrol read operation.

stop

value stops a running patrol

read operation.

NOTE:

To start the operation, the

Controller.PatrolReadMode

must be in

Manual

mode.

•

-speed

—Specifies the initialization of the Virtual disk.

•

fast

—Performs fast initialization.

•

full

—Performs slow initialization.

•

blink: <FQDD>

unblink: <FQDD>

—

<FQDD>

can be physical disk drives, virtual disks, or PCIeSSD.

•

—Specifies the PCIeSSD FQDD.

•

—Specifies the PCIeSSD controller or enclosure FQDD.

RACADM Subcommand Details

123