Dell PowerEdge MX840c iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACA - Page 50

closessn Table 12. Details of closessn Description Closes a communication session on the device. Use getssninfo to view a list of sessions that can be closed using this command. To run this subcommand, you must have the Administrator permission. NOTE: This subcommand ends all the sessions other than the current session. Synopsis • racadm closessn -i • racadm closessn -a • racadm closessn -u Input Output Example • -i - The session ID of the session to close, which can be retrieved using RACADM getssninfo subcommand. Session running this command cannot be closed. • -a - Closes all sessions. • -u - Closes all sessions for a particular user name. Successful or error message is displayed. • Closes the session 1234. racadm closessn -i 1234 • Closes all the sessions other then the active session for root user. racadm closessn -u root • Closes all the sessions. racadm closessn -a clrsel Table 13. Details of clrsel Description Removes all the existing records from the System Event Log (SEL). To use this subcommand, you must have Clear Logs permission. Synopsis racadm clrsel Example • racadm clrsel The SEL was cleared successfully config Table 14. Details of config Description Allows you to set iDRAC configuration parameters individually or to batch them as part of a configuration file and then modify iDRAC configuration properties. If the data is different, the iDRAC object is written with a new value. 50 RACADM Subcommand Details