Dell PowerEdge MX840c iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACA - Page 454

BIOS.SysSecurity.SetupPassword (Read or Write) Table 1064. Details of BIOS.SysSecurity.SetupPassword attribute Description Set up the system password. Optional parameter -o is used with this object to provide old password as an authentication for changing the previously configured password to the new password. The password can include the following: • Up to 32 characters including whitespace. • Contain numbers 0 through 9. • Only lower case alphabets are accepted. • Special characters accepted are To enable password modification, J_EN_PASSWD must be installed. To clear the already configured password, use the option available under F2 (system setup) during system start. Legal Values String of up to 22 characters Default Value Write Privilege Not Applicable Server Control License Required iDRAC Express or iDRAC Enterprise Dependency None BIOS.SysSecurity.SHA256SetupPassword (Read or Write) Table 1065. Details of BIOS.SysSecurity.SHA256SetupPassword attribute Description Indicates the SHA256 hash of the setup password. Legal Values String of 64 characters Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency None BIOS.SysSecurity.SHA256SetupPasswordSalt (Read or Write) Table 1066. Details of BIOS.SysSecurity.SHA256SetupPasswordSalt attribute Description Indicates the Salt string added to the setup password before hash. Legal Values String of 32 characters Default Value Not Applicable Write Privilege Server Control License Required iDRAC Express or iDRAC Enterprise Dependency None 454 Database Objects With Get and Set Commands