Dell PowerEdge MX840c iDRAC9 with Lifecycle Controller Version 3.30.30.30 RACA - Page 36

lrwxrwxrwx. 1 root root 27 Aug 28 13:31 /usr/lib64/libssl.so -> /usr/lib64/ libssl.so.1.0.1e lrwxrwxrwx. 1 root root 16 Oct 29 2014 /usr/lib64/libssl.so.10 -> libssl.so.1.0.1e -rwxr-xr-x. 1 root root 439912 Sep 27 2013 /usr/lib64/libssl.so.1.0.1e Accessing Indexed-Based Device Groups and Objects • To access any object, run the following syntax: device..[]. • To display the supported indexes for a specified group, run: racadm get device. Example racadm get nic.nicconfig NIC.nicconfig.1 [Key=NIC.Integrated.1-1-1#nicconfig] NIC.nicconfig.2 [Key=NIC.Integrated.1-2-1#nicconfig] NIC.nicconfig.3 [Key=NIC.Integrated.1-3-1#nicconfig] NIC.nicconfig.4 [Key=NIC.Integrated.1-4-1#nicconfig] • To display the object list for the specified group, run: racadm get device.. Example racadm get nic.nicconfig.2 [Key=NIC.Integrated.1-2-1#nicconfig] BannerMessageTimeout=5 BootStrapType=AutoDetect HideSetupPrompt=Disabled LegacyBootProto=NONE LnkSpeed=AutoNeg #VLanId=1 VLanMode=Disabled • To display a single object for the specified group, run: racadm get device... Example racadm get nic.nicconfig.3.legacybootproto [Key=NIC.Integrated.1-3#NICConfig] Legacybootproto=PXE RACADM Command Options The following table lists the options for the RACADM command: Table 1. RACADM Command Options Option Description -r -r : -u Specifies the controller's remote IP address. Use if the iDRAC port number is not the default port (443). Specifies the user name that is used to authenticate the command transaction. If the-u option is used, the -p option must be used, and the -i option (interactive) is not allowed. 36 Introduction