Dell PowerEdge PDU Metered LCD Cabling PowerEdge R515 - Page 8
Cabling a, R515 System Without a CMA
View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Cable Routing Procedures for Dell™ PowerEdge™ R515 Systems Figure 6: Right-Side Mounted CMA Installation KVM dongle placed outside the basket for Right-Side Mounting. Section 2: Cabling a Dell™ PowerEdge™ R515 System Without a CMA NOTE: The CMA on Dell™ PowerEdge™ R515 systems is optional. Without the CMA installed, the system must be powered down and all cables disconnected before it can be removed from the rack. 2.1 Routing the Cables 1. Connect all applicable cables to the rear of the system and verify that all connections are secure. 2. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to either the left or right CMA attachment brackets as described in the Rack Installation Instructions. See Figure 7 for an example of data cables secured to the left CMA bracket and power cables secured to the right CMA bracket. 3. It is recommended that the cables be secured to the outer brackets, but cables may be secured to the inner brackets as well if desired. Page 6