Dell PowerEdge PDU Metered LCD Cabling PowerEdge R515 - Page 9

Removing the CMA Brackets for Shallow Racks

Get Dell PowerEdge PDU Metered LCD PDF manuals and user guides View all Dell PowerEdge PDU Metered LCD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Cable Routing Procedures for Dell™ PowerEdge™ R515 Systems Figure 7: Cable Routing Without a CMA 2.2 Removing the CMA Brackets for Shallow Racks If you are installing the system into a shallow rack (less than 1 meter deep) and you will not be installing a CMA, the outer CMA brackets may be removed if necessary in order to allow the rails to fit properly into the rack. Remove the brackets by using a #2 Phillips screwdriver to remove the screws used to attach them to the rails as shown in Figure 8. Figure 8: Removing the CMA Brackets for Shallow Racks Page 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
Cable Routing Procedures for
Dell™ PowerEdge™ R515
Systems
Page 7
Figure 7: Cable Routing Without a CMA
2.2
Removing the CMA Brackets for Shallow Racks
If you are installing the system into a shallow rack (less than 1 meter deep) and you will not be
installing a CMA, the outer CMA brackets may be removed if necessary in order to allow the rails to fit
properly into the rack. Remove the brackets by using a #2 Phillips screwdriver to remove the screws
used to attach them to the rails as shown in Figure 8.
Figure 8: Removing the CMA Brackets for
Shallo
w Racks